In addition to buying an air compressor, some professionals use an air compressor regulator. In this article, we’ll explore the possibilities and advantages of an air compressor regulator, and whether or not it’s a good choice for your specific situation. We’ll also discuss the internal regulation of pressure in industrial air compressors.
Essentially, an air compressor regulator - you’ve guessed it - regulates the air between your tank and the appliance you’ve connected the piping to. It’s used mainly to lower the pressure so the specific application you use doesn’t receive a higher pressure than it can actually handle.
The main air supply of your air compressor is connected to the regulator’s intake port. With the regulator you can easily adapt the airflow to the one necessary for your specific application. The outlet port is connected to the application through piping.
These regulators show you the actual air pressure your air compressor generates, and can regulate it as well. These air compressor regulators are however used mostly in connection to air tools and other small appliances. So they mainly come in handy in DIY environments or garages.
But what about industrial air compressors? You do need regulation of some sort, right? The regulation in these compressors has to do with regulating the pressure and air flow so the air compressor can keep performing as it should.
For industrial air compressors, regulation of air flow is also necessary. This will not be performed by an air compressor regulator, i.e. a machine that is put in between the compressor and the application.
For industrial air compressors, the regulator is integrated in the compressor itself, since we are dealing with much larger air compressors, and not the small ones used in DIY or other situations. There are two groups of regulation systems.
The drive motor and inlet valve are continuously controlled according to pressure variations. The exact regulation depends on amplification and regulating speed. This control keeps the pressure from building up too high.
This method is most commonly used in industrial air compressors. Larger variations in pressure can occur, but between certain limit values. When the pressure builds up above a certain limit (loading), action is stopped. Then the action resumes when the pressure falls to the lowest limit value (unloading).
Pressure variation is based on the number of loading/unloading cycles per time unit.
How do you install an air compressor? What about all the auxiliary components? Air compressor set-up requires a lot of care. In this step-by-step guide, you’ll find out the most important steps of properly installing your compressor and environmental factors to keep in mind.
Buying a second-hand air compressor can be tempting, especially when you encounter a great sale. Or is it? Used air compressors hold hidden costs and even high risks to your safety that just aren't worth it. Find out why it's so dangerous and why you should opt for a new high-end compressor.
In this article, we’ll explore the possibilities and advantages of an air compressor regulator, and whether or not it’s a good choice for your specific situation. We’ll also discuss the internal regulation of pressure in industrial air compressors.