Boost quality and productivity

The design ensures elimination of residual water from the net, protects air network against rust formation, and increases overall productivity and quality.

Save costs

Availability of energy management solution to minimize energy consumption. High quality components ensure life span is prolonged coupled with higher uptime.

Easy operation and installation

The dryers are compatible with any compressor technology, fit well thanks to compact design, ready-to-install with an integrated filtration solution (ADS 1 - 10), and ensure user-friendly communication via a display that provides air quality indication and maintenance requirements.

What does an adsorption dryer do?

A compressor takes humidity from the intake air which turns into condensate during the compression process. This will cause wear and corrosion to the downstream equipment, with potential costly interruption to production, and reduction in the efficiency and service life of the equipment used. Adsorption dryers provide a solution to prevent this negative impact.

Mark Desiccant dryer S215

The Mark ADS adsorption dryers will eliminate water vapour that may potentially condensate in your compressed air system and cause damage. These dryers use an adsorption material called “desiccant” in order to absorb and remove (by regeneration phase) the humidity from the compressed air. With this method we can reach a PDP < 3°C ( -40°C. or -70°C.). This range should also be used when the ambient temperature goes below freezing point, to avoid ice building in pipes and applications. The ADS range is typically used in the chemical, food and pharmaceutical industry and whenever a PDP <3°C is requested. Adsorption removes the remaining moisture content in the air that will condense out even downstream of a refrigerant dryer. Its technology ‘simulates’ a temperature reduction down to -40°C to -70°C by attracting and retaining moisture with the desiccant media (moisture freezes at +3°C actual temperature reduction) to condense out the very last water content in the air. The moisture is removed from the air flow to your network and released. Adsorption dryers are recommended for the most demanding applications, where no moisture contamination can be accepted.

⇪⇪ Back to top ⇪⇪

Key Benefits

Reliability

Wide vessels for optimum air spread and reliable drying

Energy efficient

Compressor and dryer run < 100% load, this results in a significant extension of the drying time and a reduction in purge air consumption

Cleaner air

Eliminate any residual water from the net and ensures air network is protected against rust avoiding leakages

Contact Us

Mark Compressors logo

Mark Compressors

International Sales

⇪⇪ Back to top ⇪⇪

ADS 1 - 54

Compressor type

Maximum working pressure

Operating

Pressure

Air Treatment Capacity

Standard Dew Point

 

Bar

Bar

m³/h

l/1’

cfm

°C

ADS 1

16

7,0

7

114

4,1

-40

ADS 2

16

7,0 10

168

5,9

-40

ADS 3

16

7,0 17

282

10

-40

ADS 4

16

7,0 26

426

15,3

-40

ADS 7

16 7,0 42

708

24,7

-40

ADS 10 16 7,0 59 990 34,7 -40
ADS 15

14

7

90

1500

53

-40

ADS 21

14

7

126

2100

74

-40

ADS 27

14

7

162

2700

95

-40

ADS 33

14

7

198

3300

116

-40

ADS 39

14

7

234

3900

138

-40

ADS 54 14 7 324 5400 191 -40


Technical Specifications

ADS 66 - 215

Compressor type

Maximum working pressure

Operating

Pressure

Air Treatment Capacity

Standard Dew Point

 

Bar

Bar

m³/h

l/1’

cfm

°C

ADS 66 14 7 396 6600 233 -40
ADS 78 14 7 468 7800 275 -40
ADS 99 14 7 594 9900 350 -40
ADS 117 14 7 702 11700 413 -40
ADS 156 14 7 936 15600 551 -40
ADS 110 11 7,0 648 10800 381 -40
  14,5 12,5 774 12900 456 -40
ADS 130 11 7,0 792 13200 466 -40
  14,5 12,5 954 15900 561 -40
ADS 180 11 7,0 1080 18000 636 -40
  14,5 12,5 1296 21600 763 -40
ADS 215 11 7,0 1296 21600 736 -40
  14,5 12,5 1548 25800 911 -40

Dimensions

ADS 1 - 54

Compressor type

Length mm

Width mm

Height mm
ADS 1

92

281

445

ADS 2

92

281

504

ADS 3

92

281

635

ADS 4

92

281

815

ADS 7

92 281

1065

ADS 10 92 281 1460
ADS 15

401

620

1070

ADS 21

401

620

1115

ADS 27

401

620

1285

ADS 33

401

620

1465

ADS 39

401

620

1615

ADS 54 571 620 1915


Dimensions

ADS 66 - 215

Compressor type

Length mm

Width mm

Height mm
ADS 66 571 620 1615
ADS 78 571 620 1915
ADS 99 571 620 350
ADS 117 738 620 413
ADS 156 738 620 551
ADS 110 840 1040 1760
ADS 130 840 1040 1760
ADS 180 894 1046 1876
ADS 215 923 1100 1914


⇪⇪ Back to top ⇪⇪

Product Features


A compact quality air solution for easy installation and maintenance

Compact execution

• Versatile installation with multiport system and six possible connections.
• Compact, reduced footprint, simple design.
• This module can be installed horizontally or vertically, can stand on the floor or be mounted on a wall (optional mounting kit available)
• The inlet prefilter C is delivered loose with the dryer but it can be directly fixed on it.

 

Features

• digital controller
• nozzle purge set for different pressures
• synchronization possibility with the compressor
• two included filters (loose)

Mark Desiccant dryer DB 64

Electric timer control (STD) and Control dew point (CD)

• Purge phases are controlled by an electronic timer on the standard models (ADS / STD).
• There is also a dew point control version (ADS / CD) where the drying phase is dew point dependent and is controlled by our electronic dew point management system.

Performance

• high-efficiency silencers
• lower noise level
• very low purge consumption
• PDP -20°C / -40°C
• PDP -70°C optional
• dew point sensor (optional)

 

Options

• PDP sensor and selection
• Wall-mounting kit for units with 2 columns

Jump to topic ⮭

  • Key Benefits
  • Contact us
  • Technical Specifications
  • Product Features

  • ⇪⇪ Back to top ⇪⇪

    Non Cycling Air Dryers APAC EMEA